C&C Trucks Chinese dump truck (tipper truck) SQR3310D6BT6 manufactured by Chery Commercial Vehicles (Anhui) Co., Ltd. (a commercial vehicle manufacturer in Wuhu, Anhui Province, China; manufactures a range of Chery, Karry, Rely, C&C Trucks vehicles, including dump trucks); the dump truck (tipper truck) based on SQR3310D6BT6-E chassis. Tires are 11.00R20-18PR, 12.00R20-18PR, 11.00-20-18PR, 12.00-20-18PR, wheelbase is 1950+3200+1350 mm, cab seating capacity is 2, without ABS, cargo body is 6800/7000 × 1200 × 2300 mm, gross vehicle weight is 31000 kg, engine: YC6K1040-30 / YC6K1038-30 / YC6K1034-30 / WP10.336N / ISME385 30 / ISME345 30, max. speed is 78, 83 km/h, environmental standard is National III / Euro 3, curb weight is of the China dump truck 14775 kg, rated capacity is 16095 kg, diesel fuel.
Technical Specifications of the China dump truck C&C Trucks
No side windshield option, no side windshield and sun shade; carton dump mode after unloading; When the vehicle length is 9870mm, when 10070mm, interior lengths of 6800mm, 7000mm, wheelbase 1950 +3200 + 1350mm, rear overhang were 1890mm, 2090mm; quality parameters Changes car lengths caused by less than 3%, negligible side and bottom of the protective device materials used for Q235, connection is bolted rear protective device. section width and height of 120mm × 50mm, maximum ground clearance under the edge of 520mm. should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck C&C Trucks SQR3310D6BT6
English
Русский
