C&C Trucks Chinese dump truck (tipper truck) SQR3251N6T4 manufactured by Chery Commercial Vehicles (Anhui) Co., Ltd. (a commercial vehicle manufacturer in Wuhu, Anhui Province, China; manufactures a range of Chery, Karry, Rely, C&C Trucks vehicles, including dump trucks); the dump truck (tipper truck) based on SQR3251N6T4-E chassis. Cargo body is 5600/5800 × 1165 × 2300 mm, with ABS, liquefied natural gas, tires are 11.00R20-18PR, 12.00R20-16PR, 11.00-20-18PR, 12.00-20-18PR, environmental standard is National IV / Euro 4, gross vehicle weight is 25000 kg, curb weight is of the China dump truck 12050 kg, max. speed is 82 km/h, engine: YC6MK320N-40 / YC6MK340N-40 / YC6MK375N-40, wheelbase is 3825+1350 mm, rated capacity is 12820 kg, cab seating capacity is 2.
Technical Specifications of the China dump truck C&C Trucks
Optional no side windscreens, no rear window, sunshield and front combination lamp; cartons dump mode after unloading; when the vehicle length is 8457mm, when 8557mm, respectively Cabin length 5600mm, 5800mm, wheelbase 3825 + 1350mm, rear overhang respectively 1802mm, 1902mm; quality parameters change compartment length due within 3%, negligible side and rear underrun protection device materials used for Q235, connections are welded and bolted. section width and height of the rear protective device is 120mm × 50mm, maximum ground clearance of the lower edge of 520mm. Quality parameters optional green roof, caused by less than 3%, is negligible. The car is installed with a satellite positioning function tachograph .ABS system Manufacturer: Zhejiang VIE Technology Co., Ltd., Model: VIEABS-Ⅱ. (Note: possible inaccuracies)
Photo gallery of the China dump truck C&C Trucks SQR3251N6T4
English
Русский
