C&C Trucks Chinese dump truck (tipper truck) SQR3250D6T4-5 manufactured by Chery Commercial Vehicles (Anhui) Co., Ltd. (a commercial vehicle manufacturer in Wuhu, Anhui Province, China; manufactures a range of Chery, Karry, Rely, C&C Trucks vehicles, including dump trucks); the dump truck (tipper truck) based on SQR3250D6T4-E5 chassis. Max. speed is 78 km/h, rated capacity is 12950 kg, curb weight is of the China dump truck 11920 kg, without ABS, diesel fuel, wheelbase is 3200+1350 mm, cargo body is 4800/5000 × 1350 × 2300 mm, tires are 11.00R20, 12.00R20 16PR, 11.00-20, 12.00-20 18PR, gross vehicle weight is 25000 kg, cab seating capacity is 2, engine: YC6K1034-30 / YC6K1030-30 / WP10.336N / WP10.300N, environmental standard is National III / Euro 3.
Technical Specifications of the China dump truck C&C Trucks
Optional no side windscreens, no rear window, the installation of the general election and LCD sunshield; cartons dump mode after unloading; when the vehicle length is 7632mm, when 7832mm, respectively Cabin length 4800mm, 5000mm, shaft distance is 3200 + 1350mm, rear overhang respectively 1602mm, 1802mm; quality parameters change compartment length due within 3%, negligible side and rear underrun protection device materials used for Q235, side guards and vehicle connection. welding, the lower the vehicle after the guards bolted connections for quality parameters. section width and height of the rear protective device is 120mm × 50mm, maximum ground clearance under the edge of 520mm. optional green roof, caused less than 3%, negligible installation tachograph has GPS functionality. (Note: possible inaccuracies)
Photo gallery of the China dump truck C&C Trucks SQR3250D6T4-5
English
Русский
