C&C Trucks Chinese dump truck (tipper truck) SQR3250D6T4-2 manufactured by Chery Commercial Vehicles (Anhui) Co., Ltd. (a commercial vehicle manufacturer in Wuhu, Anhui Province, China; manufactures a range of Chery, Karry, Rely, C&C Trucks vehicles, including dump trucks); the dump truck (tipper truck) based on SQR3250D6T4-E2 chassis. Max. speed is 88 km/h, wheelbase is 4200+1350, 4600+1350 mm, tires are 11.00-20, 12.00-20, 11.00R20, 12.00R20, diesel fuel, engine: YC6K1040-33 / YC6K1038-33 / YC6K1034-33, cargo body is 6000/6200/6500/6700 × 995 × 2300 mm, gross vehicle weight is 25000 kg, environmental standard is National III / Euro 3, curb weight is of the China dump truck 12490 kg, without ABS, rated capacity is 12380 kg, cab seating capacity is 2.
Technical Specifications of the China dump truck C&C Trucks
No side windshield option, dump mode after unloading, when the length of the vehicle when the 8910 and 9110mm, interior length and 6000mm respectively 6200mm, wheelbase 4200 +1350 mm, respectively 1880mm rear overhang and 2080mm, container internal height was 995mm, and when the vehicle length is 9355 when 9555mm, 6500mm length, respectively interior and 6700mm, wheelbase 4600 +1350 mm, respectively 1925mm rear overhang and 2125mm, respectively cartons internal height 995mm, length compartments with the height and quality parameters Changes wheelbase caused less than 3%, is negligible. flank and rear underrun protection device materials used for Q235, side guards and vehicle connections for soldering, the lower the guard vehicle connection bolt connection. rear protective device section width and height of 120mm × 50mm, maximum ground clearance under the edge of 520mm. should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck C&C Trucks SQR3250D6T4-2
English
Русский
